SODA.Validate
← back to SODA Docs
1. Validate Studio
1.1. Introduction to Validate Studio
1.2. Getting Started with Validate Studio
1.2.1. System Requirements
1.2.2. Basic Navigation
1.2.3. Initial Setup
1.2.4. Installation
1.3. Dashboard
1.4. Vehicles
1.4.1. Adding ECUs
1.4.2. Adding CAN Networks
1.4.3. Simulation Models Configurations
1.4.4. Builds
1.5. Tests Library
1.5.1. Tests
1.5.2. Sets
1.5.3. Plans
1.6. Simulation Models
1.7. Rigs
1.8. Executions
2. SODA Keywords Guide
2.1. Table of contents
2.2. Basic Concepts
2.3. Interacting with CAN Messages and Signals
2.3.1. CAN Message Object
2.3.2. Create Message Keyword
2.3.3. Create E2E Message Keyword
2.3.4. Apply Message Keyword
2.3.5. Set Signal Value Keyword
2.3.6. Get Signal Value Keyword
2.3.7. Get Message Keyword
2.3.8. Start Message Keyword
2.3.9. Stop Message Keyword
2.4. Interacting with ECU Pins
2.4.1. Get Pin Voltage Keyword
2.4.2. Set Pin Voltage Keyword
2.4.3. Should Be Equal Pin Voltage Keyword
2.4.4. Get Pin Current Loop Keyword
2.4.5. Set Pin Current Loop Keyword
2.4.6. Should Be Equal Pin Current Loop Keyword
2.4.7. Get Pin PWM Keyword
2.4.8. Set Pin PWM Keyword
2.4.9. Should Be Equal Pin PWM Duty Keyword
2.4.10. Should Be Equal Pin PWM Frequency Keyword
2.4.11. Get Pin Current Keyword
2.4.12. Set Pin Current Keyword
2.4.13. Should Be Equal Pin Current Keyword
2.4.14. Get Pin Din Keyword
2.4.15. Set Pin Dout Keyword
2.5. Interacting with Simulation Models
2.5.1. Simulation Model Object
2.5.2. Get Simulation Model Keyword
2.5.3. Apply Simulation Model Keyword
2.5.4. Set Simulation Model Value Keyword
3. Software-Defined Rig Documentation
3.1. Table of Contents
3.2. Introduction
3.3. Interface Multiplexer Module (MUX)
3.3.1. Features
3.3.2. Specifications
3.3.3. Functional diagram
3.3.4. Connectors
3.3.4.1. R1 – CAN Channels
3.3.4.2. R2
3.3.4.3. LAN / VDD / DEBUG
3.4. Universal Input / Output Module (UIO)
3.4.1. Features
3.4.2. Specifications
3.4.2.1. Channel Performance
3.4.3. Functional diagram
3.4.4. Connectors
3.4.4.1. R4 – Universal I/O
3.4.4.2. LAN / VDD / DEBUG
3.5. Electronic Load Module (ELM)
3.5.1. Features
3.5.2. Specifications
3.5.2.1. Channel Performance
3.5.3. Functional diagram
3.5.4. Connectors
3.5.4.1. R2 – Load Channels 1–4
3.5.4.2. R3 – Relay Sourcing
3.5.4.3. R4 – Load Channels 5–8
3.5.4.4. LAN / VDD / DEBUG
3.6. Compliance and Contact
3.6.1. RoHS & WEEE
3.6.2. Disposal & Recycling
3.6.3. Company Info
SODA.Validate
Welcome to SODA.Validate documentation!
Welcome to SODA.Validate documentation!
1. Validate Studio
1.1. Introduction to Validate Studio
1.2. Getting Started with Validate Studio
1.3. Dashboard
1.4. Vehicles
1.5. Tests Library
1.6. Simulation Models
1.7. Rigs
1.8. Executions
2. SODA Keywords Guide
2.1. Table of contents
2.2. Basic Concepts
2.3. Interacting with CAN Messages and Signals
2.4. Interacting with ECU Pins
2.5. Interacting with Simulation Models
3. Software-Defined Rig Documentation
3.1. Table of Contents
3.2. Introduction
3.3. Interface Multiplexer Module (MUX)
3.4. Universal Input / Output Module (UIO)
3.5. Electronic Load Module (ELM)
3.6. Compliance and Contact