SODA.Features
  • ← back to SODA Docs
  • 1. Advanced Driving Assistance
    • 1.1. Hall Sensor Driver - HallSnsrDrvr
      • 1.1.1. Overview
      • 1.1.2. Functions
      • 1.1.3. Ports
      • 1.1.4. Parameters
    • 1.2. Manual Cruise Control - ManCrsCtl
      • 1.2.1. Overview
      • 1.2.2. Functions
      • 1.2.3. Ports
    • 1.3. Adas User Interface Driver - UsrIfDrvr
      • 1.3.1. Overview
      • 1.3.2. Functions
      • 1.3.3. Ports
  • 2. Braking
    • 2.1. Bosch Brake Pedal Sensor Driver - BosBrkPedlSnsrDrvr
      • 2.1.1. Overview
      • 2.1.2. Functions
      • 2.1.3. Ports
      • 2.1.4. Parameters
    • 2.2. Brake Fluid Level Sensor Driver - BrkFldSnsr
      • 2.2.1. Ports
      • 2.2.2. Parameters
    • 2.3. Brake Pad Monitoring - BrkPadMon
      • 2.3.1. Overview
      • 2.3.2. Functions
      • 2.3.3. Ports
      • 2.3.4. Parameters
      • 2.3.5. Calibration
        • 2.3.5.1. Step 1 - Set Pull-Up Resistor Value and Reference Supply Voltage
        • 2.3.5.2. Step 2 - Configure Reference Supply Voltage
        • 2.3.5.3. Step 3 - Configure Brake Pad Voltage Range Monitor
        • 2.3.5.4. Step 4 - Select Brake Pad Type
        • 2.3.5.5. Step 5 - Set The Debounce Timer
    • 2.4. Bwi Electronic Braking System Driver - BwiEltcBrkgSysDrvr
      • 2.4.1. Overview
      • 2.4.2. Functions
      • 2.4.3. Ports
      • 2.4.4. Parameters
    • 2.5. Emergency Deceleration Control - EmrgDeceCtl
      • 2.5.1. Overview
      • 2.5.2. Functions
      • 2.5.3. Ports
      • 2.5.4. Parameters
      • 2.5.5. Configuration Guide
        • 2.5.5.1. Step 1 - Enable EmrgDece
        • 2.5.5.2. Step 2 - Configure EmrgDece Request Conditions
        • 2.5.5.3. Step 3 - Configure EmrgDece Request Timeouts
    • 2.6. Vacuum Pump Driver - VacPmpSnsr
      • 2.6.1. Ports
      • 2.6.2. Parameters
  • 3. Closure
    • 3.1. Bonnet Latch Driver - BnntLtchDrvr
      • 3.1.1. Overview
      • 3.1.2. Functions
      • 3.1.3. Ports
      • 3.1.4. Parameters
    • 3.2. Boot Latch Driver - BootLtchDrvr
      • 3.2.1. Overview
      • 3.2.2. Functions
      • 3.2.3. Ports
      • 3.2.4. Parameters
    • 3.3. Central Lock Controller - CenLockCtlr
      • 3.3.1. Overview
      • 3.3.2. Functions
      • 3.3.3. Ports
      • 3.3.4. Parameters
    • 3.4. Driver Door Driver - DrvrDoorDrvr
      • 3.4.1. Overview
      • 3.4.2. Functions
      • 3.4.3. Ports
      • 3.4.4. Parameters
    • 3.5. Handle Manager - HndlMgr
      • 3.5.1. Overview
      • 3.5.2. Functions
      • 3.5.3. Ports
      • 3.5.4. Parameters
    • 3.6. Latch Manager - LtchMgr
      • 3.6.1. Overview
      • 3.6.2. Functions
      • 3.6.3. Ports
      • 3.6.4. Parameters
    • 3.7. Mirror Controller - MirrCtlr
      • 3.7.1. Overview
      • 3.7.2. Functions
      • 3.7.3. Ports
      • 3.7.4. Parameters
    • 3.8. Mirror Driver - MirrDrvr
      • 3.8.1. Overview
      • 3.8.2. Functions
      • 3.8.3. Ports
      • 3.8.4. Parameters
    • 3.9. Motor Door Driver - MotDoorDrvr
      • 3.9.1. Overview
      • 3.9.2. Functions
      • 3.9.3. Ports
      • 3.9.4. Parameters
    • 3.10. Passenger Door Driver - PassDoorDrvr
      • 3.10.1. Overview
      • 3.10.2. Functions
      • 3.10.3. Ports
      • 3.10.4. Parameters
    • 3.11. Window Controller - WinCtlr
      • 3.11.1. Overview
      • 3.11.2. Functions
      • 3.11.3. Ports
      • 3.11.4. Parameters
  • 4. Drivetrain
    • 4.1. Analog Dual Channel Accelerator Pedal Driver - AccrPedlDrvr
      • 4.1.1. Overview
      • 4.1.2. Functions
      • 4.1.3. Ports
      • 4.1.4. Parameters
      • 4.1.5. Calibration
        • 4.1.5.1. Step 1 - Configure Pedal Supply Voltage
        • 4.1.5.2. Step 2 - Calibrate Pedal Position Output Characteristic
        • 4.1.5.3. Step 3 - Configure Voltage Range Monitor
        • 4.1.5.4. Step 4 - Configure Dual Channel Comparison Monitor and Validity
        • 4.1.5.5. Step 5 - Configure Pedal Position Filter
        • 4.1.5.6. Step 6 - Configure Pedal Switch Deadband
    • 4.2. Arrival Inverter Diagnosis Monitoring - ArvlInvDiagMon
      • 4.2.1. Overview
      • 4.2.2. Functions
      • 4.2.3. Ports
      • 4.2.4. Parameters
    • 4.3. Arrival Inverter Driver - ArvlInvDrvr
      • 4.3.1. Overview
      • 4.3.2. Functions
      • 4.3.3. Ports
      • 4.3.4. Parameters
    • 4.4. Demanded Torque Allocation Controller - CtlAllcn
      • 4.4.1. Overview
      • 4.4.2. Functions
      • 4.4.3. Ports
      • 4.4.4. Parameters
      • 4.4.5. Calibration
        • 4.4.5.1. Step 1 - Vehicle characteristics
        • 4.4.5.2. Step 2 - Selection of left-to-right torque allocation variant
        • 4.4.5.3. Sub step 2.1 - Fixed ratio
        • 4.4.5.4. Sub step 2.2 - Fz Proportional
        • 4.4.5.5. Sub step 2.3 - LUT definition
        • 4.4.5.6. Step 3 - Enable torque bias correction in traction and regeneration scenarios
        • 4.4.5.7. Step 4 - Enable/Disable recalculation of torque limits
        • 4.4.5.8. Step 5 - Enable/Disable debug CAN messages
        • 4.4.5.9. Notes
    • 4.5. Demanded Torque Filtering Controller - DmdTqFil
      • 4.5.1. Overview
      • 4.5.2. Functions
      • 4.5.3. Ports
      • 4.5.4. Parameters
      • 4.5.5. Configuration Guide
        • 4.5.5.1. Step 1 - Calibrate Linear Torque Filter
        • 4.5.5.2. Step 2 - Calibrate Torque Rate Limits
        • 4.5.5.3. Step 3 - Configure Drive Mode Adjustments for Torque Filter
    • 4.6. Drivetrain Driver Request Controller - DrvrReq
      • 4.6.1. Overview
      • 4.6.2. Functions
      • 4.6.3. Ports
      • 4.6.4. Parameters
      • 4.6.5. Configuration Guide
        • 4.6.5.1. Step 1 - Calibrate Acceleration Pedal Map
        • 4.6.5.2. Step 2 - Calibrate Brake Pedal Map
        • 4.6.5.3. Step 3 - Calibrate Creep Mode
        • 4.6.5.4. Step 4 - Configure Input Processing and Fault Handling
    • 4.7. Drivetrain System Faults Handling Manager - DtSysFltMgr
      • 4.7.1. Overview
      • 4.7.2. Functions
      • 4.7.3. Ports
      • 4.7.4. Parameters
      • 4.7.5. Calibration
        • 4.7.5.1. Step 1 - Define drivetrain architecture
        • 4.7.5.2. Step 2 - Provide drivetrain system fault effect delays
        • 4.7.5.3. Step 3 - Provide axle sub-system fault effect delay
        • 4.7.5.4. Step 4 - Provide drivetrain system fault effects configuration.
        • 4.7.5.5. Step 4 - Provide limits once faults are detected
        • 4.7.5.6. Notes
    • 4.8. Drivetrain System State Manager - DtSysStMgr
      • 4.8.1. Overview
      • 4.8.2. Functions
      • 4.8.3. Ports
      • 4.8.4. Parameters
    • 4.9. Drivetrain Electric Power Limiter - EltPwrLim
      • 4.9.1. Overview
      • 4.9.2. Functions
      • 4.9.3. Ports
      • 4.9.4. Parameters
      • 4.9.5. Calibration
        • 4.9.5.1. Step 1 - Configure Electric Power Limits for Discharge/Charge condition
        • 4.9.5.2. Step 2 - Select source for Powertrain consumption
        • 4.9.5.3. Step 3 - Configure Battery Power to Motor Torque limit
        • 4.9.5.4. Notes
    • 4.10. Gear Selection Controller - GearSelr
      • 4.10.1. Overview
      • 4.10.2. Functions
      • 4.10.3. Ports
      • 4.10.4. Parameters
    • 4.11. Gear Selector Control - GearSelrCtl
      • 4.11.1. Overview
      • 4.11.2. Functions
    • 4.12. Gear Selector Fault Manager - GearSelrFltMgr
      • 4.12.1. Overview
      • 4.12.2. Functions
    • 4.13. Gear Selector Request - GearSelrReq
      • 4.13.1. Overview
      • 4.13.2. Functions
    • 4.14. Analog Gear Selector Switch Pack Driver - GearSelrSwtPkDrvr
      • 4.14.1. Overview
      • 4.14.2. Functions
      • 4.14.3. Ports
      • 4.14.4. Parameters
      • 4.14.5. Configuration Guide
        • 4.14.5.1. Step 1 - Input type selection
        • 4.14.5.2. Step 1.1 - Configure RND Buttons/Selector (AIN)
        • 4.14.5.3. Step 1.2 - Configure Park Button/Selector (AIN)
        • 4.14.5.4. Note
    • 4.15. Hmi Driver - HmiDrvr
      • 4.15.1. Ports
      • 4.15.2. Parameters
    • 4.16. Hmi Safety Arbitrator - HmiSftyArbr
      • 4.16.1. Overview
      • 4.16.2. Functions
      • 4.16.3. Ports
      • 4.16.4. Parameters
    • 4.17. Immobilizer State Arbitrator - ImobStArbr
      • 4.17.1. Overview
      • 4.17.2. Functions
      • 4.17.3. Ports
      • 4.17.4. Parameters
    • 4.18. Input Discrete Signal Monitor - InpDisSigMonr
      • 4.18.1. Ports
      • 4.18.2. Parameters
    • 4.19. Limp Mode - LimpMod
      • 4.19.1. Overview
      • 4.19.2. Functions
      • 4.19.3. Ports
      • 4.19.4. Parameters
      • 4.19.5. Calibration
        • 4.19.5.1. Step 1 - Set speed limits
        • 4.19.5.2. Step 2 - Tune the debounce of the signal to avoid false positive
        • 4.19.5.3. Notes
    • 4.20. McLaren IPG5 Inverter Driver - MclrnIpg5InvDrvr
      • 4.20.1. Overview
      • 4.20.2. Functions
      • 4.20.3. Ports
      • 4.20.4. Parameters
    • 4.21. Odometer Estimator - OdoEstimr
      • 4.21.1. Overview
      • 4.21.2. Functions
      • 4.21.3. Ports
      • 4.21.4. Parameters
      • 4.21.5. Calibration
        • 4.21.5.1. Step 1 - Distance calculation as a function of selected gear (TRIP)
        • 4.21.5.2. Step 2 - Set Maximum Total and Trip Distance Values
        • 4.21.5.3. Notes
    • 4.22. Torque Vectoring Control - TqVectCtl
      • 4.22.1. Overview
      • 4.22.2. Functions
      • 4.22.3. Ports
      • 4.22.4. Parameters
      • 4.22.5. Calibration
        • 4.22.5.1. Step 1 - Enable/Disable Torque Vectoring control
        • 4.22.5.2. Step 1.1 - Provide Torque Vectoring activation tresholds based on vehicle longitudinal speed in km/h
        • 4.22.5.3. Step 2 - Set the reference yaw rate correction factor
        • 4.22.5.4. Step 2.1 - Tuning of the breakpoints of the LUTs is possible via the following parameters:
        • 4.22.5.5. Step 2.2 - Filtering of the correction factor
        • 4.22.5.6. Step 3 - Reference Yaw Moment Feedforward contribution
        • 4.22.5.7. Step 3.1 - Provide a dead-band interval for FeedForward contribution based on vehicle speed
        • 4.22.5.8. Step 3.2 - Tune the FeedForward contribution low-pass filter
        • 4.22.5.9. Step 4 - Reference Yaw Moment Feedback contribution
        • 4.22.5.10. Step 4.1 - Error activation for Feedback contribution
        • 4.22.5.11. Step 4.2 - Provide tyre slip angle activation thresholds
        • 4.22.5.12. Step 4.3 - Tune the Feedback controller
        • 4.22.5.13. Step 4.4 - Tune the torque reduction factor
        • 4.22.5.14. Notes
    • 4.23. Traction Control System Controller - TracCtlSys
      • 4.23.1. Overview
      • 4.23.2. Functions
      • 4.23.3. Ports
      • 4.23.4. Parameters
      • 4.23.5. Calibration
        • 4.23.5.1. Step 1 - Enable/Disable traction control
        • 4.23.5.2. Step 1.1 - Vehicle parameters
        • 4.23.5.3. Step 2 - Provide the tyre longitudinal slip limits
        • 4.23.5.4. Step 2.1 - Provide the longitudinal tyre slip limits
        • 4.23.5.5. Step 2.2 - Provide longitudinal tyre slip limit as a static threshold
        • 4.23.5.6. Step 2.3 - Low speed TCS limits
        • 4.23.5.7. Step 3 - Tune the feedback controller (PI-with gain scheduling)
        • 4.23.5.8. Note 1
        • 4.23.5.9. Note 2
    • 4.24. Drive Mode Selection Manager - UsrSelDrvMod
      • 4.24.1. Overview
      • 4.24.2. Functions
      • 4.24.3. Ports
      • 4.24.4. Parameters
      • 4.24.5. Calibration
        • 4.24.5.1. Step 1 - Select override condition for driver request
        • 4.24.5.2. Step 2 - Select drive mode and corresponding pedal map
        • 4.24.5.3. Step 3 - Select regen mode and corresponding pedal map
        • 4.24.5.4. Step 4 - Configure pedal maps
        • 4.24.5.5. Notes
    • 4.25. Vehicle Acceleration Controller - VehAccCtl
      • 4.25.1. Overview
      • 4.25.2. Functions
      • 4.25.3. Ports
      • 4.25.4. Parameters
      • 4.25.5. Configuration Guide
        • 4.25.5.1. Step 1 - Calibrate Torque-Acceleration Mapping
    • 4.26. Vehicle Dynamic State Estimator - VehDynStEstimr
      • 4.26.1. Overview
      • 4.26.2. Functions
      • 4.26.3. Ports
      • 4.26.4. Parameters
      • 4.26.5. Calibration
        • 4.26.5.1. Step 1 - Connect input signals
        • 4.26.5.2. Step 2 - Configure input signal preprocessing
        • 4.26.5.3. Step 3 - Configure vehicle parameters
        • 4.26.5.4. Step 4 - Configure cornering stiffness parameters
        • 4.26.5.5. Step 5 - Configure road wheel angle offset estimator
        • 4.26.5.6. Step 6 - Curvature plausibility check
        • 4.26.5.7. Step 7 - Longitudinal velocity estimation
        • 4.26.5.8. Step 8 - Advanced tuning
    • 4.27. Vehicle Speed Limit Controller - VehSpdLimCtl
      • 4.27.1. Overview
      • 4.27.2. Functions
      • 4.27.3. Ports
      • 4.27.4. Parameters
      • 4.27.5. Configuration Steps
        • 4.27.5.1. Step 1 - Configure Speed Limit Sources
        • 4.27.5.2. Step 2 - Configure Speed Control Function
        • 4.27.5.3. Step 3 - Configure Speed Limit Kickdown Logic
        • 4.27.5.4. Step 4 - Configure Speed Limit Fault Monitors
    • 4.28. Vehicle Speed Processing Manager - VehSpdProcg
      • 4.28.1. Overview
      • 4.28.2. Functions
      • 4.28.3. Ports
      • 4.28.4. Parameters
      • 4.28.5. Configuration Guide
        • 4.28.5.1. Step 1 - Configure Vehicle Speed Sources
        • 4.28.5.2. Step 2 - Configure Vehicle Speed Filter
        • 4.28.5.3. Step 3 - Configure Vehicle Standstill Flag conditions
        • 4.28.5.4. Step 4 - Configure Vehicle Speed Comparison Monitor
    • 4.29. Vehicle Torque Source Selection Manager - VehTqSrcSeln
      • 4.29.1. Overview
      • 4.29.2. Functions
      • 4.29.3. Ports
      • 4.29.4. Parameters
      • 4.29.5. Calibration
        • 4.29.5.1. Configure Torque Priority
        • 4.29.5.2. Notes
    • 4.30. Wheel Torque Limit Manager - WhlTqLim
      • 4.30.1. Overview
      • 4.30.2. Functions
      • 4.30.3. Ports
      • 4.30.4. Parameters
      • 4.30.5. Calibration
        • 4.30.5.1. Step 1 - Set per-wheel limits
        • 4.30.5.2. Step 2 - Selection of torque demand input
        • 4.30.5.3. Step 3 - Definition of vehicle parameters for cornering characteristics
        • 4.30.5.4. Step 4 - Enable sending of the debug CAN message
        • 4.30.5.5. Notes
  • 5. Exterior Lighting
    • 5.1. Auto Indicator Off Controller - AutoIndcrOff
      • 5.1.1. Overview
      • 5.1.2. Functions
      • 5.1.3. Ports
      • 5.1.4. Parameters
    • 5.2. Braking Lights Controller - BrkgLiMgr
      • 5.2.1. Overview
      • 5.2.2. Functions
      • 5.2.3. Ports
      • 5.2.4. Parameters
    • 5.3. Day Running Light Manager - DrlMgr
      • 5.3.1. Overview
      • 5.3.2. Functions
      • 5.3.3. Ports
      • 5.3.4. Parameters
    • 5.4. Exterior Light Manager - ExtrLiMgr
      • 5.4.1. Overview
      • 5.4.2. Functions
      • 5.4.3. Ports
      • 5.4.4. Parameters
    • 5.5. Flashing Light Manager - FlsgLiMgr
      • 5.5.1. Overview
      • 5.5.2. Functions
      • 5.5.3. Ports
      • 5.5.4. Parameters
    • 5.6. Fog Light Manager - FogLiMgr
      • 5.6.1. Overview
      • 5.6.2. Functions
      • 5.6.3. Ports
      • 5.6.4. Parameters
    • 5.7. Head Light Manager - HeaLiMgr
      • 5.7.1. Overview
      • 5.7.2. Functions
      • 5.7.3. Ports
      • 5.7.4. Parameters
    • 5.8. HELLA Rain Light Sensor LIN Driver - HellaRainLiSnsrDrvr
      • 5.8.1. Overview
      • 5.8.2. Functions
      • 5.8.3. Ports
      • 5.8.4. Parameters
    • 5.9. Analog Lamp Driver - LampDrvr
      • 5.9.1. Overview
      • 5.9.2. Functions
      • 5.9.3. Ports
      • 5.9.4. Parameters
    • 5.10. LiMgr - LiMgr
      • 5.10.1. Overview
      • 5.10.2. Functions
      • 5.10.3. Ports
      • 5.10.4. Parameters
    • 5.11. Position Light Manager - PosnLiMgr
      • 5.11.1. Overview
      • 5.11.2. Functions
      • 5.11.3. Ports
      • 5.11.4. Parameters
    • 5.12. Reverse Lights Controller - RvsLiMgr
      • 5.12.1. Overview
      • 5.12.2. Functions
      • 5.12.3. Ports
  • 6. Generic
    • 6.1. Isolation Status Processing Driver - IsolnStsPrcsDrvr
      • 6.1.1. Overview
      • 6.1.2. Functions
      • 6.1.3. Ports
      • 6.1.4. Parameters
  • 7. High Voltage Power
    • 7.1. Battery Management System Driver - ArvlMbmsDrvr
      • 7.1.1. Overview
      • 7.1.2. Functions
      • 7.1.3. Ports
      • 7.1.4. Parameters
    • 7.2. Charging Vehicle State Machine Request Manager - ChrgVsmReqMgr
      • 7.2.1. Overview
      • 7.2.2. Functions
      • 7.2.3. Ports
      • 7.2.4. Parameters
    • 7.3. Hella Hatch Lock Bridge Driver - HellaHtchLockBrdgDrvr
      • 7.3.1. Overview
      • 7.3.2. Functions
      • 7.3.3. Ports
      • 7.3.4. Parameters
    • 7.4. Human Machine Interface Indication Energy Calculation - HmiIndcnEgyClcn
      • 7.4.1. Overview
      • 7.4.2. Functions
      • 7.4.3. Ports
    • 7.5. High Voltage Active Discharge Manager - HvAcvDchaMgr
      • 7.5.1. Overview
      • 7.5.2. Functions
      • 7.5.3. Ports
      • 7.5.4. Parameters
    • 7.6. High Voltage Integrity Monitor - HvIntgyMon
      • 7.6.1. Overview
      • 7.6.2. Functions
      • 7.6.3. Ports
      • 7.6.4. Parameters
    • 7.7. High Voltage Limited Power Mode Manager - HvLimpModMgr
      • 7.7.1. Overview
      • 7.7.2. Functions
      • 7.7.3. Ports
      • 7.7.4. Parameters
    • 7.8. High Voltage Power Aggregator - HvPwrAggrr
      • 7.8.1. Overview
      • 7.8.2. Functions
      • 7.8.3. Ports
      • 7.8.4. Parameters
    • 7.9. High Voltage Power Limiter - MstngHvPwrLimr
      • 7.9.1. Overview
      • 7.9.2. Ports
      • 7.9.3. Parameters
    • 7.10. High Voltage Power System State Machine - HvPwrSysStMac
      • 7.10.1. Overview
      • 7.10.2. Functions
      • 7.10.3. Ports
      • 7.10.4. Parameters
    • 7.11. High Voltage Short Circuit Monitor - HvShoCircMonr
      • 7.11.1. Overview
      • 7.11.2. Functions
      • 7.11.3. Ports
      • 7.11.4. Parameters
    • 7.12. High Voltage Thermal Runaway Detection Controller - HvThermRunawyDetnCtlr
      • 7.12.1. Overview
      • 7.12.2. Functions
      • 7.12.3. Ports
      • 7.12.4. Parameters
    • 7.13. Overview: High Voltage Interlock Driver - HvilDrvr
      • 7.13.1. Overview
      • 7.13.2. Functions
      • 7.13.3. Ports
      • 7.13.4. Parameters
    • 7.14. Metis Thermal Event Detection Unit Driver - MetisThermEveDetnUnitDrvr
      • 7.14.1. Overview
      • 7.14.2. Functions
      • 7.14.3. Ports
      • 7.14.4. Parameters
  • 8. Interior Lighting
    • 8.1. Gear Indication Driver - GearIndcnDrvr
      • 8.1.1. Overview
      • 8.1.2. Functions
      • 8.1.3. Ports
      • 8.1.4. Parameters
    • 8.2. Interior Light Driver - IntrLiDrvr
      • 8.2.1. Overview
      • 8.2.2. Functions
      • 8.2.3. Ports
      • 8.2.4. Parameters
    • 8.3. Interior Light Manager - IntrLiMgr
      • 8.3.1. Overview
      • 8.3.2. Functions
      • 8.3.3. Ports
      • 8.3.4. Parameters
  • 9. Low Voltage Power
    • 9.1. Low Voltage Battery Aggregator - LvBatDaAggrr
      • 9.1.1. Overview
      • 9.1.2. Functions
      • 9.1.3. Ports
      • 9.1.4. Parameters
    • 9.2. Low Voltage Battery Management System Driver - LvBatMngtSysDrvr
      • 9.2.1. Overview
      • 9.2.2. Functions
      • 9.2.3. Ports
      • 9.2.4. Parameters
    • 9.3. Low Voltage Checks Driver - LvChk
      • 9.3.1. Overview
      • 9.3.2. Functions
      • 9.3.3. Ports
      • 9.3.4. Parameters
    • 9.4. Low Voltage Control Load Inhibition Manager - LvCtlLoaInhMgr
      • 9.4.1. Overview
      • 9.4.2. Functions
      • 9.4.3. Ports
      • 9.4.4. Parameters
    • 9.5. Low Voltage DCDC converter Voltage Setpoint Manager - LvDcdcHvCurMgr
      • 9.5.1. Overview
      • 9.5.2. Functions
      • 9.5.3. Ports
      • 9.5.4. Parameters
    • 9.6. Low Voltage DCDC converter Voltage Setpoint Manager - LvDcdcSpMgr
      • 9.6.1. Overview
      • 9.6.2. Functions
      • 9.6.3. Ports
      • 9.6.4. Parameters
    • 9.7. Low Voltage Desired Top Up State Manager - LvDesTopUpStMgr
      • 9.7.1. Overview
      • 9.7.2. Functions
      • 9.7.3. Ports
      • 9.7.4. Parameters
    • 9.8. Low Voltage Meta DCDC Driver - LvMeDcdcDrvr
      • 9.8.1. Overview
      • 9.8.2. Functions
      • 9.8.3. Ports
      • 9.8.4. Parameters
    • 9.9. Low Voltage Power System Controller - LvPwrSysCtlr
      • 9.9.1. Overview
      • 9.9.2. Functions
      • 9.9.3. Ports
      • 9.9.4. Parameters
    • 9.10. Low Voltage Power System LV Battery Pin Driver - LvPwrSysLvBatPinDrvr
      • 9.10.1. Overview
      • 9.10.2. Functions
      • 9.10.3. Ports
    • 9.11. Low Voltage TopUp WakeUp State-of-charge Based Manager - LvTopUpSocBasdMgr
      • 9.11.1. Overview
      • 9.11.2. Functions
      • 9.11.3. Ports
      • 9.11.4. Parameters
    • 9.12. Pin Power Driver - PinPwrDrvr
      • 9.12.1. Overview
      • 9.12.2. Functions
      • 9.12.3. Ports
      • 9.12.4. Parameters
    • 9.13. Pin Vcc Aggregator - PinVccAggrr
      • 9.13.1. Overview
      • 9.13.2. Functions
      • 9.13.3. Ports
  • 10. Passive Safety
    • 10.1. Analog Sensor Driver - AnSnsrDrvr
      • 10.1.1. Overview
      • 10.1.2. Functions
      • 10.1.3. Ports
      • 10.1.4. Parameters
    • 10.2. Crash Sensor Controller - CrashSnsrCtlr
      • 10.2.1. Overview
      • 10.2.2. Functions
      • 10.2.3. Ports
      • 10.2.4. Parameters
    • 10.3. Horn Controller - HornCtlr
      • 10.3.1. Overview
      • 10.3.2. Functions
      • 10.3.3. Ports
      • 10.3.4. Parameters
    • 10.4. Horn Driver - HornDrvr
      • 10.4.1. Overview
      • 10.4.2. Functions
      • 10.4.3. Ports
      • 10.4.4. Parameters
    • 10.5. Driver Seat Adjustment - DrvrSeatAdjmt
      • 10.5.1. Overview
      • 10.5.2. Functions
      • 10.5.3. Ports
      • 10.5.4. Parameters
    • 10.6. SeatbeltMonitor - SeatbeltMonitor
      • 10.6.1. Overview
      • 10.6.2. Functions
      • 10.6.3. Ports
      • 10.6.4. Parameters
  • 11. Security
    • 11.1. Alarm Driver - AlrmDrvr
      • 11.1.1. Overview
      • 11.1.2. Functions
      • 11.1.3. Ports
      • 11.1.4. Parameters
    • 11.2. Immobilizer Controller - ImobCtlr
      • 11.2.1. Overview
      • 11.2.2. Functions
      • 11.2.3. Ports
      • 11.2.4. Parameters
  • 12. Steering
    • 12.1. Bosch SAS Driver - BosSteerWhlAgSnsrDrvr
      • 12.1.1. Overview
      • 12.1.2. Functions
      • 12.1.3. Ports
      • 12.1.4. Parameters
    • 12.2. Bourns SAS driver - BrnsSteerWhlAgSnsrDrvr
      • 12.2.1. Overview
      • 12.2.2. Functions
      • 12.2.3. Ports
      • 12.2.4. Parameters
    • 12.3. DeAmertek EPAS CAN Driver - DamtkEpasDrvr
      • 12.3.1. Overview
      • 12.3.2. Functions
      • 12.3.3. Ports
      • 12.3.4. Parameters
  • 13. Thermal
    • 13.1. Ambient Temperature Converter - AmbTCnvr
      • 13.1.1. Overview
      • 13.1.2. Functions
      • 13.1.3. Ports
    • 13.2. Battery Thermal System Arbitration - BatThermSysArbn
      • 13.2.1. Overview
      • 13.2.2. Functions
      • 13.2.3. Ports
      • 13.2.4. Parameters
    • 13.3. Battery Thermal System Compressor Speed Request - BatThermSysCmprSpdReq
      • 13.3.1. Overview
      • 13.3.2. Functions
      • 13.3.3. Ports
      • 13.3.4. Parameters
    • 13.4. Battery Thermal System Cooling Fan Control - BatThermSysCoolgFanCtl
      • 13.4.1. Ports
      • 13.4.2. Parameters
    • 13.5. Battery Thermal System Coolant Pump Control - BatThermSysCooltPmpCtl
      • 13.5.1. Overview
      • 13.5.2. Functions
      • 13.5.3. Ports
      • 13.5.4. Parameters
    • 13.6. Battery Thermal System Heater Control - BatThermSysHeatrCtl
      • 13.6.1. Overview
      • 13.6.2. Functions
      • 13.6.3. Ports
      • 13.6.4. Parameters
    • 13.7. Battery Thermal System State Machine - BatThermSysStMac
      • 13.7.1. Overview
      • 13.7.2. Functions
      • 13.7.3. Ports
      • 13.7.4. Parameters
    • 13.8. Battery Thermal System Valve Control - BatThermSysVlvCtl
      • 13.8.1. Overview
      • 13.8.2. Functions
      • 13.8.3. Ports
      • 13.8.4. Parameters
    • 13.9. Climate Adapter - MstngClimAdpr
      • 13.9.1. Overview
      • 13.9.2. Functions
      • 13.9.3. Ports
      • 13.9.4. Parameters
    • 13.10. Flap Bridge Driver - FlapBrdgDrvr
      • 13.10.1. Overview
      • 13.10.2. Functions
      • 13.10.3. Ports
      • 13.10.4. Parameters
    • 13.11. Flap Servo Driver - FlapServoDrvr
      • 13.11.1. Overview
      • 13.11.2. Functions
      • 13.11.3. Ports
      • 13.11.4. Parameters
    • 13.12. Heated Glass Aggregator - HeatdGlAggrr
      • 13.12.1. Overview
      • 13.12.2. Functions
      • 13.12.3. Ports
      • 13.12.4. Parameters
    • 13.13. Heated Glass Driver - HeatdGlDrvr
      • 13.13.1. Overview
      • 13.13.2. Functions
      • 13.13.3. Ports
      • 13.13.4. Parameters
    • 13.14. Hella Rotary Actuator Driver - HellaRotrActrDrvr
      • 13.14.1. Overview
      • 13.14.2. Functions
      • 13.14.3. Ports
      • 13.14.4. Parameters
    • 13.15. Negative Temperature Coefficient Driver - NtcDrvr
      • 13.15.1. Overview
      • 13.15.2. Functions
      • 13.15.3. Ports
      • 13.15.4. Parameters
    • 13.16. Pressure Sensor Driver - PSnsrDrvr
      • 13.16.1. Overview
      • 13.16.2. Functions
      • 13.16.3. Ports
      • 13.16.4. Parameters
    • 13.17. Pin MCC Driver - PinVccDrvr
      • 13.17.1. Overview
      • 13.17.2. Functions
      • 13.17.3. Ports
      • 13.17.4. Parameters
    • 13.18. Power Train Cooling Fan Control - PtCoolgFanCtl
      • 13.18.1. Overview
      • 13.18.2. Functions
      • 13.18.3. Ports
      • 13.18.4. Parameters
    • 13.19. Power Train Cooling Pump Control - PtCoolgPmpCtl
      • 13.19.1. Overview
      • 13.19.2. Functions
      • 13.19.3. Ports
      • 13.19.4. Parameters
    • 13.20. Power Train Cooling State Machine - PtCoolgStMac
      • 13.20.1. Overview
      • 13.20.2. Functions
      • 13.20.3. Ports
      • 13.20.4. Parameters
    • 13.21. Pin PWM Driver - PwmDrvr
      • 13.21.1. Overview
      • 13.21.2. Functions
      • 13.21.3. Ports
      • 13.21.4. Parameters
    • 13.22. Sanden Air Conditioning Compressor Driver - SandenAcDrvr
      • 13.22.1. Overview
      • 13.22.2. Functions
      • 13.22.3. Ports
      • 13.22.4. Parameters
    • 13.23. Single Zone Climate Aggregator - SngZoneClimAggrr
      • 13.23.1. Overview
      • 13.23.2. Functions
      • 13.23.3. Ports
      • 13.23.4. Parameters
    • 13.24. Single Zone Climate Controller - SngZoneClimCtlr
      • 13.24.1. Overview
      • 13.24.2. Functions
      • 13.24.3. Ports
      • 13.24.4. Parameters
    • 13.25. Spal Blower driver - SpalBlwrDrvr
      • 13.25.1. Overview
      • 13.25.2. Functions
      • 13.25.3. Ports
      • 13.25.4. Parameters
    • 13.26. Webasto Heater Driver - WebastoHvh
      • 13.26.1. Overview
      • 13.26.2. Functions
      • 13.26.3. Ports
      • 13.26.4. Parameters
  • 14. Tire Pressure Monitoring
    • 14.1. Tire Pressure Monitor Controller - TirePMonCtlr
      • 14.1.1. Overview
      • 14.1.2. Functions
      • 14.1.3. Ports
      • 14.1.4. Parameters
    • 14.2. Tire Pressure Monitor Driver - TirePMonDrvr
      • 14.2.1. Ports
      • 14.2.2. Parameters
  • 15. User Input
    • 15.1. Window LIN Driver - WinDrvr
      • 15.1.1. Overview
      • 15.1.2. Functions
      • 15.1.3. Ports
      • 15.1.4. Parameters
    • 15.2. Steering Wheel Switch Pack Driver - SteerWhlSwtPkDrvr
      • 15.2.1. Overview
      • 15.2.2. Functions
      • 15.2.3. Ports
      • 15.2.4. Parameters
    • 15.3. Turn Signals Stalk Driver - TurnSigStlkDrvr
      • 15.3.1. Overview
      • 15.3.2. Functions
      • 15.3.3. Ports
      • 15.3.4. Parameters
  • 16. Vehicle State
    • 16.1. Network Manager - NetMgr
      • 16.1.1. Overview
      • 16.1.2. Functions
      • 16.1.3. Ports
      • 16.1.4. Parameters
    • 16.2. Network Master - NetMst
      • 16.2.1. Overview
      • 16.2.2. Functions
      • 16.2.3. Ports
      • 16.2.4. Parameters
    • 16.3. Network Slave - NetSlave
      • 16.3.1. Overview
      • 16.3.2. Functions
      • 16.3.3. Ports
      • 16.3.4. Parameters
    • 16.4. Simple Vehicle State Machine - SimpVsm
      • 16.4.1. Overview
      • 16.4.2. Functions
      • 16.4.3. Ports
      • 16.4.4. Parameters
    • 16.5. Vehicle State Machine Adapter - VsmAdpr
      • 16.5.1. Overview
      • 16.5.2. Functions
      • 16.5.3. Ports
      • 16.5.4. Parameters
    • 16.6. Vehicle State Machine Request Manager - VsmReqMgr
      • 16.6.1. Overview
      • 16.6.2. Functions
      • 16.6.3. Ports
      • 16.6.4. Parameters
  • 17. Wiper Washer
    • 17.1. Doga Washer Driver - DogaWshrDrvr
      • 17.1.1. Overview
      • 17.1.2. Functions
      • 17.1.3. Ports
      • 17.1.4. Parameters
    • 17.2. Fluid Level Driver - FldLvlDrvr
      • 17.2.1. Overview
      • 17.2.2. Functions
      • 17.2.3. Ports
      • 17.2.4. Parameters
    • 17.3. Valeo Wiper Driver - ValeoWiprDrvr
      • 17.3.1. Overview
      • 17.3.2. Functions
      • 17.3.3. Ports
      • 17.3.4. Parameters
    • 17.4. Wiper Controller - WiprCtlr
      • 17.4.1. Overview
      • 17.4.2. Functions
      • 17.4.3. Ports
      • 17.4.4. Parameters
    • 17.5. Wiper Selector - WiprSelr
      • 17.5.1. Overview
      • 17.5.2. Functions
      • 17.5.3. Ports
      • 17.5.4. Parameters
    • 17.6. Wiper Controller - WshrCtlr
      • 17.6.1. Overview
      • 17.6.2. Functions
      • 17.6.3. Ports
      • 17.6.4. Parameters
SODA.Features
  • Search

© Copyright 2026 SODA.AUTO UK LTD.